Wash & Protect
A thorough exterior wash and protective finish.
- Marine soap wash and non-skid deck scrub
- Rub-rail cleanup and glass polish
- Premium spray sealant
Choose interior-only, exterior-only, or inside-and-out boat detailing, plus engine and onboard-system winterization. Mobile or on-site around Greers Ferry Lake; confirm your exact location, access, and travel.
Starting prices are estimates. Confirm scope and your final quote before work begins.

Starting rates from $19 per foot
Starting rates shown below
Confirm location, access, and travel
Choose interior-only, exterior-only, or combined packages. Winterization and the 14 confirmed services are also listed below; final pricing depends on the boat and exact work.
Rates assume the stated standard scope. Boat condition, measured length, engine/system configuration, materials, access, travel, or added labor may change the total. Any separate parts/materials and travel charges are confirmed with you before starting.
Listed exterior rates are per linear foot. Exterior work only; interior cleaning is not included.
A thorough exterior wash and protective finish.
A polished finish for light oxidation and fine scratches.
Heavy oxidation, wet-sanding, and multi-stage rotary cut require an on-site inspection for an accurate quote.
Deep restoration for heavily oxidized gelcoat.
Wash & Protect is the listed starting rate. The deeper exterior tiers are quoted after we review your boat, and Heavy Gelcoat Rescue requires an on-site inspection. Gelcoat restoration and waxing are included in the matching exterior tier, not charged twice. A like-new finish is not promised.
Interior Refresh starts at $19 per linear foot. The deeper interior tiers are quoted after we review your boat, since scope varies with condition. Severe stains and complex cabins are always quoted separately.
Light vacuum, dust-down, wipe accessible surfaces, and clean accessible interior glass where suitable.
For ordinary light soil. Deep stains, extraction, mold treatment, canvas/Bimini, and travel are not included in the base rate.
More thorough vacuuming and cleaning of accessible vinyl/seats, hard surfaces, floors or carpets.
Heavy stains, extraction, mold treatment, canvas/Bimini, and complex cabins are quoted separately.
Deep vacuuming and scrubbing accessible decks/carpets, vinyl cleaning, and accessible locker clean-out.
Canvas/Bimini, severe stains, and complex cabins are quoted separately. Results vary with material and condition.
Inside & Out Refresh starts at $24 per linear foot total. The deeper combined packages are quoted after we review your boat, and Heavy Gelcoat + Deep Interior requires an on-site inspection. Each combined price is one total per linear foot — do not add separate component rates again.
Light exterior wash and waterline wipe, interior vacuum and dust-down, glass cleaning, and towel dry for a generally maintained boat.
A light combined package, not the full standalone interior and exterior tiers stacked together.
Interior Detail plus Exterior Wash & Protect: accessible interior vacuum/surface cleaning with the full exterior wash-and-sealant scope.
No machine polishing or deep interior work. Condition, access, materials, and travel may change the quote.
Interior Deep Clean plus Exterior Restore & Shine, including light-oxidation polishing and marine polymer wax.
Severe stains, wet-sanding, added correction passes, canvas/Bimini, and complex cabins require a separate quote and approval.
Heavy oxidation, wet-sanding, and multi-stage rotary cut require an on-site inspection for an accurate quote.
Interior Deep Clean paired with heavy gelcoat restoration for the listed standard scopes.
Wet-sanding is only if needed and approved. Severe interior conditions, added passes, materials, and travel may change the quote.
Tube washing and brightening, priced per boat foot by pontoon configuration.
Tube washing and brightening for twin-toon pontoons.
Aluminum condition and travel can change the quote. Finish varies; no like-new result is promised.
Tube washing and brightening for tri-toon pontoons.
Aluminum condition and travel can change the quote. Finish varies; no like-new result is promised.
Prices depend on engine/system type and exact scope. Parts, materials, and travel are extra where noted and confirmed in your quote.
Confirm the scope for your outboard, I/O, or inboard configuration.
Parts, fluids/special materials, added systems, extra labor, and travel are confirmed in the final quote.
Gear-lube service for the identified lower unit or drive.
Gear oil, parts, travel, diagnosis, and repairs are quoted separately.
Oil-and-filter service for a standard-capacity engine.
Oil, filter, extra capacity, and travel are priced separately in the quote.
Replacement service for the correct engine-specific separator/filter.
Part, travel, and any priming or diagnostic work are quoted separately.
Quoted by the number and type of bags, tanks, and pumps.
System-specific scope, materials, and travel may change the total.
The standard visit includes the first pump/system.
Additional pumps, parts, travel, and repairs are quoted separately.
The quote confirms which sinks, tank, shower, or hot-water heater are included.
Additional systems, materials, access, and travel may change the total.
One clearly defined standard head/waste-system scope.
Extra fixtures, tanks, systems, materials, and travel are confirmed in the quote.
How much does it cost to winterize a boat? See the full cost guide
Placement service only; it is not a guarantee against moisture, mildew, or mold.
Placement service with a $35 product allowance and up to 1 hr labor.
Additional supplies, quantity, access, or travel may change the quote. Placement does not guarantee prevention of moisture, mildew, or mold.
Detailing base rates use measured boat length. All starting rates are estimates. Confirm the boat, system, requested scope, access, materials, travel, and final quote before work begins.
There’s no complicated booking form. Get in touch with a few details and talk through the next step.
Share your boat type, approximate length, and where it’s located.
Say whether you need detailing or winterization and when.
Confirm requested service, availability, and pricing directly before making plans.
Mobile or on-site service is available for confirmed work around the lake. Call to confirm your exact location, access, and any travel charge.
Complete the short form and your messaging app will open a prepared text to Affordable Detail at (501) 238-2300. Review the details, then tap Send—or call if you prefer.
Prefer to talk? Call (501) 238-2300Still have a question? Give us a call and we’ll talk through your boat and the work.
(501) 238-2300Choose interior-only detailing starting at $19 per linear foot, exterior-only detailing starting at $19 per linear foot, or a combined inside-and-out package starting at $24 per linear foot total. The deeper exterior, interior, and combined tiers are quoted after we review your boat, since scope varies with condition. Heavy gelcoat restoration — on its own or paired with interior deep cleaning — is priced individually after an on-site inspection instead of at a fixed per-foot rate. Pontoon tube brightening is priced separately. Scope and results depend on boat condition.
The menu lists engine winterization, gear lube, oil and filter, fuel-water separator, ballast, livewell/baitwell, freshwater, and head/galley services. Included steps depend on the specific boat and system; confirm the written scope and final quote before work.
Affordable Detail serves the Greers Ferry Lake area in Arkansas, with mobile or on-site service for confirmed work. Call to confirm coverage at your exact location, access, and any travel charge.
Detailing prices are starting rates per linear foot: interior-only starts at $19, exterior-only at $19, and combined packages at $24. The deeper exterior, interior, and combined tiers are quoted after we review your boat, because scope, condition, and the work involved vary. Quoted tiers are total package rates, not component prices to stack. Boat condition, measured length, materials, access, travel, or added labor may change the total. Confirm the scope and final quote before work begins.